Reddiseals E.W.S (Epoxy Wood Stabiliser) is specially designed two-part low viscosity, solvent free, resin solution which is designed to strengthen weakened wood fibres by penetrating deep into the wood. Manufactured by Timbabuild, the product is used as a primer in conjunction with our E.R.C or E.H.B systems. Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion. The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) a damp wood should be allowed to dry naturally, or by way of a hot air gun. The two components are mixed manually into a separate container, and thoroughly agitated for one minute. The 2:1 mixing ratio should be strictly observed. EWS should be applied using a standard brush and left to cure for 45 minutes. Solvent free – suitable for indoors and outdoors Excellent penetration due to low viscosity Pre-measured to Volume 2:1 ratio to ensure accurate mix High strength and durability 150ml bottle Fast and simple to use, easy to clean and store Can be used with both ERC (TB101) and EHB (TB201) All technical product drawings are in metric measurements Also available in the Timber Build Starter Kit
