Tools for Plastic Cable Ties, Plastic/Metal, Width2.5~4.8mm,Thickness1.0~1.6 mm

OPERATING INSTRUCTIONS 1. Wrap the cable tie on the object and tighten it up. 2. Adjust tension settings by rotating the tension control knob. 3. Insert the cable tie strap through the tension tool and place the cutting head against the head of the cable tie. 4. Press the trigger until the cable tie strap is cut off. 5. Finish. TENSION ADJUSTMENTTension knob provides easy, blind tension adjustment. BLADE REPLACEMENT (GIT-703 Plus) 1. Firstly, adjust the tension to zero. Release the cap of the tension knob with a coin. Take out the screwdriver. 2. Unscrew the blade guard screw with the attached screwdriver. And pull out the blade guard. 3. Remove the used blade. 4. Remove the sticker on the screwdriver and take out the new blade carefully. 5. Put the new blade on the tension tool. Make sure the chamfered corner is on the upper right position. Put the blade guard back. 6. Reinstall the screw. Do not over tighten it. Put the attached screwdriver back to the tension tool. Finish. Part NameTools for Plastic Cable TiesMaterialPlastic/MetalDimensionmm190x140x36inch7.48x5.51x1.41Net Weightg230lbs0.5CertificateCE, RoHSApplicable Cable Ties Widthmm2.5~4.8inch0.10~0.19Applicable Cable Ties Thicknessmm1.0~1.6inch0.04~0.06